Dell IDRAC6 3.5, IDRAC6 1.95, CMC 3.2 manual CfgSerial, CfgSsnMgtTelnetIdleTimeout Read/Write, 181

cfgSsnMgtTelnetIdleTimeout (Read/Write)

Description	Defines the Telnet idle timeout. This property sets the amount of
	time in seconds that a connection is allowed to remain idle (there is
	no user input). The session is cancelled if the time limit set by this
	property is reached. Changes to this setting do not affect the
	current session (you must log out and log in again to make the new
	settings effective).
	An expired Telnet session displays the following error message:
	• In case of iDRAC6 on Rack and Tower Servers:
	Connection timed out
	• In case of iDRAC6 Enterprise on Blade Servers:
	Session timed out. Closing the session...
	After the message is displayed, the system returns you to the shell
	that generated the Telnet session.
Legal Values	0 (No timeout)
	0– 10800
	For CMC: 60 – 10800
Default	For iDRAC6 on Rack and Tower Servers: 300
	For iDRAC6 Enterprise on Blade Servers and CMC: 1800

NOTE: If 0 (no timeout), the network connection does not send keep alive packets to probe the client. Otherwise, keep alive packets are sent to guarantee that the client is responding.

cfgSerial

This group contains configuration parameters for iDRAC6 or CMC services. One instance of the group is allowed.

NOTE: Use this object with the config or getconfig subcommands.

NOTE: To use this object property for CMC, you must have Chassis Configuration Administrator privilege.

iDRAC6 and CMC Property Database Group and Object Descriptions

181