iDRAC6 and CMC Property Database Group and Object Descriptions 273
FILE LOCATION:
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY

cfgNetTuningNic100MB (Read/Write)

cfgNetTuningNicFullDuplex (Read/Write)

cfgNetTuningNicMtu (Read/Write)

NOTE: IPv6 requires a minimum MTU of 1280. If IPv6 is enabled, and
cfgNetTuningMtu is set to a lower value, the CMC uses an MTU of 1280.
cfgSensorRedundancy
This group is applicable only for iDRAC6 and is used to set the power supply
redundancy.
The following sections provides information about the objects in the
cfgSensorRedundancy group.
NOTE: The cfgSensorRedundancy object group is applicable only for iDRAC6 on
Rack and Tower Servers and not for iDRAC6 Enterprise on Blade Servers.
Description Specifies the speed to use for the RAC NIC. This property is not
used if the cfgNetTuningNicAutoNeg is set to 1 (enabled).
Legal Values 0 (10 MBit)
1 (100 MBit)
Default 1
Description Specifies the duplex setting for the RAC or CMC NIC. This
property is used only if the cfgNetTuningNicAutoNeg is set to 0
(disabled).
Legal Values 0 (Half Duplex)
1 (Full Duplex)
Default 1
Description The size in bytes of the maximum transmission unit used by
iDRAC6 or CMC NIC.
Legal Values 576 – 1500
Default 1500