RACADM Subcommand Details 133
sslcsrgen NOTE: To use this subcommand, you must have Configure iDRAC permission.
Synopsis
racadm sslcsrgen [-g] [-f <filename>]
racadm sslcsrgen -s
Table2-42 describes the sslcsrgen subcommand options.
NOTE: The -f option is not supported for the serial/Telnet/ssh console.
NOTE: If the -f option is not specified, the filename defaults to sslcsr in your current
directory.
Subcommand Description
sslcsrgen Can be used to generate a CSR and download the file to the client’s
local file system. The CSR can be used for creating a custom SSL
certificate that can be used for SSL transactions on iDRAC6.
Table 2-42. sslcsrgen Subcommand Options
Option Description
-g Generates a new CSR.
-s Returns the status of a CSR generation process (generation in progress,
active, or none).
-f Specifies the filename of the location, <filename>, where the CSR is
downloaded.
-t Specifies the type of certificate to view, either the CA certificate or
server certificate.
1 = webserver CSR - enables you to generate a CSR for the
webcertificate server certificate.
2 = KMC certificate - enables you to generate a CSR for the KMC
certificate and a CA certificate for Directory Service.
NOTE: The current release does not support type 2.