Serveraction, 115 | Dell IDRAC6 3.5, IDRAC6 1.95, CMC 3.2 manual

serveraction

NOTE: To use this subcommand, you must have Execute Server Control Commands permission.

Subcommand Description

serveraction Enables users to perform power management operations on the host system.

Synopsis

racadm serveraction <action>

Table 2-30describes the serveraction power control options.

Table 2-30. serveraction Subcommand Options

String Description

<action> Specifies the action. The options for the <action> string are:

•powerdown — Powers down the managed system.

•powerup — Powers up the managed system.

•powercycle — Issues a power-cycle operation on the managed system. This action is similar to pressing the power button on the system’s front panel to power down and then power up the system.

•powerstatus — Displays the current power status of the server (ON or OFF)

•hardreset — Performs a reset (reboot) operation on the managed system.

Output

The serveraction subcommand displays an error message if the requested operation could not be performed, or a success message if the operation is completed successfully.

RACADM Subcommand Details

115

Page 115

Image 115

Dell IDRAC6 3.5, IDRAC6 1.95, CMC 3.2 manual Serveraction, 30describes the serveraction power control options, 115

IDRAC6 1.95, CMC 3.2, IDRAC6 3.5 specifications

Dell's Integrated Dell Remote Access Controller (iDRAC) has been a pivotal technology for remote server management, and versions like iDRAC6 3.5 and iDRAC6 with firmware 1.95 have significantly enhanced the capabilities of server management solutions. These integrated management tools focus on improving system performance and uptime for data centers and enterprises.

The iDRAC6 3.5 version comes packed with advanced features that allow administrators to manage servers from anywhere in the world. It supports a web-based interface that provides a comprehensive view of system health, alerts, and logs to facilitate efficient monitoring and management. One significant aspect of iDRAC6 is its ability to provide out-of-band management, allowing IT professionals to access and control servers without relying on the operating system. This feature is crucial for troubleshooting hardware issues or performing system reboots in case of failures.

Another key feature of iDRAC6 3.5 is its Virtual Console capabilities, enabling remote interaction via a browser-based interface. This allows users to perform operations as if they were physically present at the server, including BIOS updates and firmware upgrades. Security is paramount with iDRAC, and version 3.5 includes enhanced security protocols ensuring that access is restricted and that communication remains encrypted.

The Chassis Management Controller (CMC) 3.2 provides integrated management for multiple servers, simplifying monitoring and management within modular systems. It facilitates consolidated management of multiple iDRACs, streamlining tasks such as firmware updates and network configuration across an entire rack of servers. CMC also boasts features like environmental monitoring and alarm notifications, allowing for quicker responses to potential hardware issues.

Furthermore, the iDRAC6 1.95 firmware enhances the functionality offered by previous versions. It includes improved user interfaces for better usability, along with enhanced capabilities for managing power and thermal configurations. With intelligent power management, server administrators can optimize power consumption and cooling, leading to cost savings and reduced environmental impact.

Together, iDRAC6 3.5, CMC 3.2, and iDRAC6 1.95 exemplify Dell's commitment to providing robust and efficient server management solutions. Their features, technologies, and characteristics not only improve operational efficiency but also ensure that organizations can maintain high system availability and performance in an increasingly digital world.

Contents

Page 2013 Contents Contents 105 100101 104 113 108109 112 140 135136 139 165 CfgRhostsSyslogPowerLoggingEnabled 187 186189 CfgRacTuneTimezoneOffset Read Only 216 209 223 221225 232 235 233237 CfgServerPeakPowerConsumptionTimestamp 256 252253 254 265 264 CfgCurrentIPv6DNSServer1 277 275 284 Contents Supported Racadm Interfaces Introduction Remote Racadm Racadm Syntax UsageLocal Racadm SSH/Telnet Racadm 1lists the options for the Racadm command Racadm Command OptionsRacadm Command Options Description Racadm Subcommands IDRAC6 on Blade IDRAC6 on Rack Supported Racadm SubcommandsServers CMC CMC CMC Other Documents You May Need Introduction Introduction Racadm Subcommand Details Subcommand Description ? and ? subcommandSynopsis Example for racadm ? Output Help and help subcommandHelp For rack and tower servers ArpChassisaction Example Chassisaction Subcommand Options Description Perform a reset of switch-3 Closessn ClearasrscreenClosessn Clearasrscreen Closes all the sessions for root user 2describes the closessn subcommand optionsExamples Closes the session Clrsel ClrraclogClrraclog Cmcchangeover ConfigConfig Cmcchangeover Input 3describes the config subcommand options Config Subcommand Options and Descriptions Connect 4describes the connect subcommand optionsConnect Connects to the switch or server serial console Connect Subcommand Options Description Coredump Coredump Deploy CoredumpdeleteDeploy Coredump Clears any currently resident coredump data stored Deploy Subcommand Options 5describes the deploy subcommand options Together in the same command Feature FeatureFeature Subcommand Options Description May reboot the active CMC 7lists the status messages returned by the command FeaturecardStatus Messages Returned by featurecard -s Command Actions Featurecard Subcommand Options Description 8describes the featurecard subcommand optionLists active SD card features and SD card status 9describes the fwupdate subcommand options FwupdateFwupdate Subcommand Options Description Synopsis for CMC Synopsis for iDRAC6For local Racadm 11. fwupdate Subcommand Options Option Description 11describes the fwupdate subcommand optionsFor remote Racadm 11. fwupdate Subcommand Options Option Description Examples for CMC 11. fwupdate Subcommand Options Update firmware on servers of iDRAC6 generation Update firmware on multiple serversUpdate firmware on multiple IOM infrastructures This option reads the current status of the firmware update Getchassisname 12describes the getassettag subcommand options12. getassettag Subcommand Options Option Description Getassettag 13describes the getconfig subcommand options Getconfig13. getconfig Subcommand Options Option Description Racadm getconfig -g cfgLanNetworking Displays the model names for the daughter cards in servers 14describes the getdcinfo subcommand options14. getdcinfo Subcommand Options Description Getdcinfo Example output below is for a system with multi-slot servers Getdcinfo -n Getflexaddr 15. getflexaddr Subcommand Options OptionDescription 15describes the getflexaddr subcommand options Idrac Management Controller Disabled Getfanreqinfo Switch Module Fan Request Table Getioinfo Switch Module Fan Request Table Post Getkvminfo 16. getled Subcommand Options OptionDescription 16describes the getled subcommand optionsGetled 17. getmacaddress Subcommand Options Description 17describes the getmacaddress subcommand optionsGetmacaddress Display MAC for server-1 Display extra iSCSI MACs for server-1 if available BMC MAC NIC1 MAC NIC2 MAC AF7B Fcdc Getmodinfo 18. getmodinfo Subcommand Options OptionDescription 18describes the getmodinfo subcommand options OFF Getniccfg Sample Output IPv6 settings Getpbinfo Getpbinfo PS1 Getpminfo Displays the output with no headers or labels 19. getraclog Subcommand Options DescriptionGetraclog Getraclog Specifies the starting record used for the display 19. getraclog Subcommand Options Option DescriptionGetractime Displays the output in a single line Getredundancymode 20. getractime Subcommand Options Description Getsel 21. getsel Subcommand Options DescriptionMore Getsensorinfo Getslotname 22. getslotname Subcommand Options Description 22describes the getslotname subcommand optionsLegal values Getssinfo 23describes the getssninfo subcommand options23. getssninfo Subcommand Options Option Description Getssninfo Root 192.168.0.10 04/07/2010 Type User IP Address Login Date/TimeGetsvctag Displays the service tag of the host system Getsvctag 24. getsysinfo Subcommand Options Description 24describes the getsysinfo subcommand optionsGetsysinfo DNS RAC WIN-IHF5D2BF5SN = OFF Examples 25lists the gettracelog options used to read entries 25. gettracelog Subcommand options Option DescriptionGettracelog Limitations 100 Getuscversion 101 26describes the getversion subcommand options26. getversion Subcommand Options Description Getversion 102 Racadm getversion 103 Racadm getversion -c 104 Ifconfig Krbkeytabupload Uploads a Kerberos keytab file 27. kerbkeytabupload Subcommand Options DescriptionKrbkeytabupload 105 106 LocalConRedirDisableSubcommandDescription KmcSelfSignedCertGen Ping NetstatPing 107 108 Ping6Ping6 Racdump Subsystem Racadm Command109 110 DNS CMC 111 = Undefined 28. racreset Subcommand Options Option Description Racreset28describes the racreset subcommand options Start the iDRAC6 soft reset sequence 113 RacresetcfgStart the iDRAC6 hard reset sequence Synopsis 114 29describes the remoteimage subcommand options29. remoteimage Subcommand Options and Descriptions Remoteimage 115 30describes the serveraction power control options30. serveraction Subcommand Options String Description Serveraction 116 Setassettag 117 31describes the setassettag subcommand option31. setassettag Subcommand Options Command Setchassisname Setflexaddr 32. setflexaddr Subcommand Options OptionDescription118 119 SetledSetled Example for iDRAC6 33describes the setled subcommand options33. setled Subcommand Options OptionDescription Example for CMC 121 34describes the setniccfg subcommand options34. setniccfg Subcommand Options Option Description Setniccfg 122 35describes the setractime subcommand options35. setractime Subcommand Options Description Setractime 123 35. setractime Subcommand Options Option Description 124 36describes the setslotname subcommand options36. setslotname Subcommand Options Setslotname 125 37describes the setsysinfo subcommand options37. setsysinfo Subcommand Options Setsysinfo 126 SshpkauthUpload View 127 38describes the sshpkauth subcommand options38. sshpkauth Subcommand Options OptionDescription Delete 128 39describes the sslcertdownload subcommand options39. sslcertdownload Subcommand Options Option Description Sslcertdownload Sslcertupload 39. sslcertdownload Subcommand OptionsSslcertupload 129 40. sslcertupload Subcommand Options Description 40describes the sslcertupload subcommand options130 131 41describes the sslcertview subcommand options41. sslcertview Subcommand Options Description Sslcertview 132 133 42describes the sslcsrgen subcommand options42. sslcsrgen Subcommand Options Option Description Sslcsrgen 134 SslkeyuploadSslkeyupload Uploads SSL key from the client to iDRAC6 135 Sslresetcfg43describes the sslkeyupload subcommand options 43. sslkeyupload Subcommand Options Description Testemail 44. testemail Configuration Action Command136 137 Testfeature45describes the testemail subcommand options 46describes the testfeature subcommand options 138 SubcommandsTestfeature -f ad Synopsis 46. testfeature Subcommand Options Option Description 139 Testfeature -f adkrb Synopsis 140 Testfeature -f ldap Synopsis47. cfgIpmiPet Commands Action Testtrap 141 48describes the testtrap subcommand options48. testtrap Subcommand Options Description Traceroute 142 49describes the usercertupload subcommand optionsTraceroute6 Usercertupload 143 49. usercertupload Subcommand Options Description Version 50describes the sslcertview subcommand options50. sslcertview Subcommand Options Description Usercertview Vflashsd VflashsdVflashpartition 145 Options valid only with create action 51describes the vflashpartition subcommand options51. vflashpartition Subcommand Options Option Description 146 To delete a partition To create a 20MB empty partition147 To attach a partition to the host operating system To display the emulation typeTo display the format type of the partition To change a read-only partition to read-write Vmkey VmdisconnectVmkey 149 150 151 1lists the supported object groups Supported Object Groups SubcommandDisplayable Characters Displayable characters include the following set 153 IdRacProductInfo Read Only IdRacInfo154 IdRacName Read Only IdRacDescriptionInfo Read OnlyIdRacVersionInfo Read Only IdRacBuildInfo Read Only Legal Values 1 True CfgNicIPv4Enable Read/WriteCfgLanNetworking 156 Legal Values 0 = Shared CfgNicSelection Read/Write2lists the supported cfgNicSelection modes 157 158 CfgNicVLanEnable Read/Write 159 CfgNicVLanId Read/WriteCfgNicVLanPriority Read/Write CfgDNSDomainNameFromDHCP Read/Write 160 Default blankCfgDNSDomainName Read/Write CfgDNSRacName Read/Write Example CfgDNSRegisterRac Read/Write161 162 CfgDNSServersFromDHCP Read/WriteCfgDNSServer1 Read/Write CfgDNSServer2 Read/Write 163 CfgNicEnable Read/WriteCfgNicIpAddress Read/Write CfgNicNetmask Read/Write 164 CfgNicGateway Read/WriteCfgNicUseDhcp Read/Write CfgNicMacAddress Read Only 165 CfgRhostsFwUpdateTftpEnable Read/WriteCfgRhostsFwUpdateIpAddr Read/Write CfgRemoteHosts 166 CfgRhostsFwUpdatePath Read/WriteCfgRhostsNtpEnable CfgRhostsSmtpServerIpAddr Read/Write CfgRhostsNtpServer3 Default NullCfgRhostsNtpServer1 CfgRhostsNtpServer2 CfgRhostsSyslogPort Read/Write CfgRhostsSyslogEnable Read/WriteLegal Values Default CfgRhostsNtpMaxDist 169 CfgRhostsSyslogServer1 Read/WriteCfgRhostsSyslogServer2 Read/Write CfgRhostsSyslogServer3 Read/Write CfgRhostsSyslogPowerLoggingInterval CfgRhostsSyslogPowerLoggingEnabled170 CfgUserAdminIndex Read Only CfgUserAdmin171 172 CfgUserAdminIpmiLanPrivilege Read/WriteCfgUserAdminPrivilege Read/Write 3lists the bit masks for user priveleges 0x0000002 173CMC Specific User Privelege 0x0000001 174 CfgUserAdminUserName Read/WriteSample Bit Masks for User Privileges Privilege Bit Mask 175 CfgUserAdminPassword Write OnlyCfgUserAdminEnable Read/Write CfgUserAdminSolEnable Read/Write 176 CfgUserAdminIpmiSerialPrivilege Read/WriteCfgEmailAlert CfgEmailAlertIndex Read Only CfgEmailAlertEmailName CfgEmailAlertEnable Read/WriteCfgEmailAlertAddress Read/Write CfgEmailAlertCustomMsg Read/Write CfgSessionManagement CfgSsnMgtRacadmTimeout Read/Write178 CfgSsnMgtConsRedirMaxSessions Read/Write CfgSsnMgtWebserverTimeout Read/Write179 180 CfgSsnMgtSshIdleTimeout Read/Write CfgSerial CfgSsnMgtTelnetIdleTimeout Read/Write181 CfgSerialBaudRate Read/Write CfgSerialConsoleEnable Read/Write182 183 CfgSerialConsoleQuitKey Read/Write CfgSerialConsoleColumns CfgSerialConsoleIdleTimeout Read/WriteCfgSerialConsoleCommand Read/Write CfgSerialConsoleNoAuth Read/Write 185 CfgSerialCom2RedirEnable Read/WriteCfgSerialSshEnable Read/Write CfgSerialHistorySize Read/Write CfgOobSnmp CfgSerialTelnetEnable Read/Write186 CfgOobSnmpAgentCommunity Read/Write CfgOobSnmpAgentEnable Read/WriteDefault public CfgTraps CfgTrapsCommunityName CfgTrapsEnableCfgTrapsIndex Read Only CfgTrapsAlertDestIpAddr CfgRacTuneConRedirPort Read/Write CfgRacTuning189 190 CfgRacTuneRemoteRacadmEnable Read/WriteCfgRacTuneCtrlEConfigDisable CfgRacTuneHttpPort Read/Write 191 CfgRacTuneIpRangeEnable Read/WriteCfgRacTuneHttpsPort Read/Write CfgRacTuneIpRangeAddr Read/Write 192 CfgRacTuneIpBlkEnable Read/WriteCfgRacTuneIpRangeMask Read/Write CfgRacTuneIpBlkFailCount Read/Write CfgRacTuneTelnetPort Read/Write CfgRacTuneIpBlkFailWindow Read/WriteCfgRacTuneIpBlkPenaltyTime Read/Write CfgRacTuneSshPort Read/Write CfgRacTuneDaylightOffset Read Only CfgRacTuneConRedirEnable Read/WriteCfgRacTuneConRedirEncryptEnable Read/Write CfgRacTuneAsrEnable Read/Write 195 CfgRacTuneTimezoneOffset Read Only 196 CfgRacTuneLocalConfigDisable Read/WriteCfgRacTuneWebserverEnable Read/Write CfgRacTuneLocalServerVideo Read/Write 197 CfgRacTunePluginType Read/Write 198 IfcRacManagedNodeOsIfcRacMnOsHostname Read Only IfcRacMnOsOsName Read Only 199 CfgVirMediaBootOnce Read/WriteCfgRacVirtual CfgRacVirMediaAttached Read/Write CfgVirtualFloppyEmulation Read/Write CfgVirMediaKeyEnable Read/Write200 CfgSDWriteProtect Read only CfgLCDriveEnable Read/Write201 202 CfgServerInfoCfgServerInfoIndex Read only CfgServerSlotNumber Read only CfgServerFW Read only CfgServerServiceTag Read onlyCfgServerBIOS Read only CfgServerName Read/Write CfgServerNic3MacAddress Read only CfgServerBmcMacAddress Read onlyCfgServerNic1MacAddress Read only CfgServerNic2MacAddress Read only CfgServerPriority Read/Write CfgServerNicEnable Read/WriteCfgServerIPMIOverLanEnable Read/Write CfgServerNic4MacAddress Read only CfgServerDNSIMCName Read/Write CfgServerPowerBudgetAllocation Read onlyCfgServerRootPassword Write only CfgServerDNSRegisterIMC Read/Write CfgServerBootOnce Read/Write CfgServerFirstBootDevice Read/Write207 Displays the current power consumption for a server CfgServerPowerConsumption Read only208 209 CfgActiveDirectory CfgADRootDomain CfgADEnable Read/WriteCfgADRacDomain Read/Write CfgADRacName Read/Write CfgADDomainController1 Read/Write CfgADSCLEnableCfgADSSOEnable Read/Write CfgADDomainController CfgADType Read/Write CfgADAuthTimeout Read/WriteCfgADDomainController2 Read/Write CfgADDomainController3 Read/Write CfgADGlobalCatalog CfgADSpecifyServerEnable213 214 CfgADGlobalCatalog1 Read/WriteCfgADGlobalCatalog2 Read/Write CfgADGlobalCatalog3 Read/Write 215 CfgADCertValidationEnable Read/WriteCfgADDcSRVLookupEnable Read/Write CfgADDcSRVLookupbyUserdomain Read/Write CfgADGcRootDomain Read/Write CfgADGcSRVLookupEnable Read/WriteCfgLDAP CfgADDcSRVLookupDomainName Read/Write 217 CfgLdapEnable Read/WriteCfgLdapServer Read/Write CfgLdapPort Read/Write 218 CfgLdapBasedn Read/WriteCfgLdapUserAttribute Read/Write CfgLdapGroupAttribute Read/Write 219 CfgLdapBindpassword Write onlyCfgLdapGroupAttributeIsDN Read/Write CfgLdapBinddn Read/Write CfgLdapSearchFilter Read/Write CfgLDAPCertValidationEnable Read/WriteCfgLDAPNetworkTimeout CfgLDAPSearchTimeout CfgLDAPSRVLookupDomainName CfgLDAPSRVLookupEnableCfgLDAPSRVLookupServiceName CfgLdapRoleGroup CfgLdapRoleGroupDN Read/Write CfgLdapRoleGroupIndex Read Only222 223 CfgStandardSchemaCfgLdapRoleGroupPrivilege Read/Write CfgSSADRoleGroupIndex Read Only 5displays the bit masks for Role Group privileges CfgSSADRoleGroupName Read/WriteCfgSSADRoleGroupDomain Read/Write CfgSSADRoleGroupPrivilege Read/Write CfgChassisPeakPowerTimestamp Read Only CfgChassisPowerCfgChassisInPower Read Only CfgChassisPeakPower Read Only CfgChassisPowerCap Read/Write CfgChassisMinPower Read OnlyCfgChassisMinPowerTimestamp Read Only CfgChassisPowerStatus Read Only 227 CfgChassisPowerCapF Read/WriteCfgChassisPowerCapBTU Read/Write CfgChassisPowerCapFBTU Read/Write CfgChassisRedundancyPolicy Read/Write CfgChassisPowerCapPercent Read/WriteCfgChassisPowerCapFPercent Read/Write CfgChassisDynamicPSUEngagementEnable Read/Write 229 CfgChassisMaxPowerConservationMode Read/WriteCfgChassisAllow110VACOperation Read/Write CfgChassisPerformanceOverRedundancy Read/Write CfgChassisTotalInPowerAvailable Read Only CfgChassisInMaxPowerCapacity Read OnlyCfgChassisInPowerServerAllocation Read Only CfgChassisInfrastructureInPowerAllocation Read Only CfgSystemEnergyConsumptionClear Write Only CfgChassisPowerButtonEnable Read/WriteTo reset energy statistics, set this value to Disabled CfgIpmiSolMinPrivilege Read/Write CfgIpmiSolEnable Read/WriteCfgIpmiSol CfgIpmiSolBaudRate Read/Write CfgIpmiSolSendThreshold Read/Write CfgIpmiLanEnable Read/WriteCfgIpmiLan CfgIpmiSolAccumulateInterval Read/Write CfgIpmiPetCommunityName Read/Write CfgIpmiLanAlertEnable Read/WriteCfgIpmiLanPrivLimit Read/Write CfgIpmiEncryptionKey Read/Write CfgIpmiPetIPv6Index Read Only CfgIpmiPetIPv6AlertEnable Read/WriteCfgIpmiPetIpv6 CfgIpmiPef CfgIpmiPefAction Read/Write CfgIpmiPefEnable Read/WriteCfgIpmiPefName Read Only CfgIpmiPefIndex Read/Write CfgIpmiPetAlertDestIpAddr Read/Write CfgIpmiPetAlertEnable Read/WriteCfgIpmiPet CfgIpmiPetIndex Read Only CfgUserDomainIndex Read Only CfgServerPowerCfgServerPowerStatus Read Only CfgUserDomain 239 CfgServerPowerAllocation Read OnlyCfgServerActualPowerConsumption Read Only CfgServerPowerCapEnable Read Only CfgServerPeakPowerConsumptionTimestamp Read Only CfgServerMinPowerCapacity Read OnlyCfgServerMaxPowerCapacity Read Only CfgServerPeakPowerConsumption Read Only CfgServerPowerCapPercent Read/Write CfgServerPowerConsumptionClear Write OnlyCfgServerPowerCapWatts Read/Write CfgServerPowerCapBtuhr Read/Write CfgServerPowerLastWeekAvg Read Only CfgServerPowerLastMinAvg Read OnlyCfgServerPowerLastHourAvg Read Only CfgServerPowerLastDayAvg Read Only 243 CfgServerPowerLastHourMinPower Read OnlyCfgServerPowerLastHourMinTime Read Only CfgServerPowerLastHourMaxPower Read Only Minimum power value during the last day CfgServerPowerLastHourMaxTime Read OnlyCfgServerPowerLastDayMinPower Read Only Displays the minimum power value during the last day Maximum power value during the last day CfgServerPowerLastDayMinPowerTime Read OnlyCfgServerPowerLastDayMaxPower Read Only Displays the maximum power value during the last day Minimum power value during the last week CfgServerPowerLastDayMaxPowerTime Read OnlyCfgServerPowerLastWeekMinPower Read Only Displays the minimum power value during the last week Maximum power value during the last week CfgServerPowerLastWeekMinPowerTime Read OnlyCfgServerPowerLastWeekMaxPower Read Only Displays the maximum power value during the last week CfgServerPowerInstHeadroom Read Only CfgServerPowerLastWeekMaxPowerTime Read Only248 249 CfgServerPowerPeakHeadroom Read OnlyCfgServerActualAmperageConsumption Read Only CfgServerPeakAmperage Read Only CfgServerPeakAmperageTimeStamp Read Only CfgServerCumulativePowerConsumption Read OnlyDisplays the cumulative power consumption Cumulative power consumption 251 CfgServerCumulativePowerConsumptionTimeStamp Read OnlyCfgServerCumulativePowerClear Write Only CfgServerPeakPowerClear Write Only CfgKVMInfo CfgServerPowerPCIeAllocation Read/WriteCfgKVMAccessToCMCEnable Enables or disables the Dell CMC Console access on the iKVM CfgAlertingFilterMask CfgKVMFrontPanelEnableCfgAlertingEnable CfgAlerting 254 CfgServerPowerSupplyCfgServerPowerSupplyIndex CfgAlertingSourceEmailName CfgServerPowerSupplyFwVer Read Only CfgServerPowerSupplyMaxInputPower Read OnlyCfgServerPowerSupplyMaxOutputPower Read Only CfgServerPowerSupplyOnlineStatus Read Only CfgIPv6Address CfgServerPowerSupplyTypeCfgIPv6Enable Read/Write CfgIPv6LanNetworking 257 CfgIPv6Address1 Read/WriteCfgIPv6Gateway Read/Write CfgIPv6PrefixLength Read/Write 258 CfgIPv6AutoConfig Read/WriteCfgIPv6LinkLocalAddress Read Only CfgIPv6Address2 Read Only CfgIPv6Address6 Read Only CfgIPv6Address3 Read OnlyCfgIPv6Address4 Read Only CfgIPv6Address5 Read Only CfgIPv6Address10 Read Only CfgIPv6Address7 Read OnlyCfgIPv6Address8 Read Only CfgIPv6Address9 Read Only CfgIPv6Address14 Read Only CfgIPv6Address11 Read OnlyCfgIPv6Address12 Read Only CfgIPv6Address13 Read Only 262 CfgIPv6Address15 Read OnlyCfgIPv6DNSServersFromDHCP6 Read/Write CfgIPv6DNSServer1 Read/Write 263 CfgIPv6DNSServer2 Read/Write CfgCurrentLanNetworking Read only This group displays the current CMC IPv6 properties CfgNicCurrentIPv4EnabledCfgCurrentIPv6Enabled CfgCurrentIPv6LanNetworking Read only CfgCurrentIPv6Gateway CfgCurrentIPv6AutoConfigWasUsedCfgCurrentLinkLocalAddress CfgCurrentIPv6Address1 CfgIpmiSerialBaudRate Read/Write CfgIPv6URLCfgIpmiSerial CfgIPv6URLstring Read Only 268 CfgIpmiSerialConnectionMode Read/WriteCfgIpmiSerialChanPrivLimit Read/Write CfgIpmiSerialFlowControl Read/Write CfgIpmiSerialDeleteControl Read/Write CfgIpmiSerialHandshakeControl Read/WriteCfgIpmiSerialLineEdit Read/Write CfgIpmiSerialEchoControl Read/Write CfgIpmiSerialInputNewLineSequence Read/Write CfgIpmiSerialNewLineSequence Read/Write270 CfgSmartCard CfgSmartCardLogonEnable Read/WriteCfgSmartCardCRLEnable Read/Write Enables or disables the Certificate Revocation List CRL 272 CfgNetTuningCfgNetTuningNicSpeed CfgNetTuningNicAutoneg Read/Write CfgSensorRedundancy CfgNetTuningNic100MB Read/WriteCfgNetTuningNicFullDuplex Read/Write CfgNetTuningNicMtu Read/Write 274 CfgSensorRedundancyIndex Read OnlyCfgSensorRedundancyPolicy Read/Write CfgSensorRedundancyCapabilities Read Only CfgVFlashSDSize Read Only CfgVFlashSDEnable Read/WriteCfgVFlashSD CfgSensorRedundancyStatus Read Only CfgVFlashSDHealth Read Only Default OKCfgVFlashSDLicensed Read Only CfgVFlashSDAvailableSize Read Only CfgVFlashPartitionSize ReadOnly CfgVFlashPartitionCfgVFlashSDWriteProtect Read Only CfgVFlashPartitionIndex ReadOnly 278 CfgVFlashPartitionEmulationType ReadWriteCfgVFlashPartitionOSVolLabel ReadOnly CfgVFlashPartitionFormatType ReadOnly CfgVFlashPartitionAttachState Read/Write CfgVFlashPartitionAccessType Read/WriteCfgLoggingSELOEMEventFilterEnable Read/Write CfgLogging CfgKMSProfilePortNumberRead/Write CfgKMSProfileCfgKMSProfileIndexRead only CfgKMSProfileIPAddressRead/Write 281 CfgKMSProfileTimeoutRead/WriteCfgRacSecurity CfgKMSProfileDeviceGroupRead/Write CfgRacSecCsrLocalityName Read/Write CfgRacSecCsrCommonName Read/WriteCfgRacSecCsrOrganizationName Read/Write CfgRacSecCsrOrganizationUnit Read/Write 283 CfgRacSecCsrCountryCode Read/WriteCfgRacSecCsrEmailAddr Read/Write CfgRacSecCsrKeySize Read/Write 284 CfgRacSecurityDataCfgRacSecCsrIndex CfgRacSecCsrKeySize 285 Default USCfgRacSecCsrStateName CfgRacSecCsrCountryCode 286 CfgRacSecCsrEmailAddr 287 288 289 Deprecated Commands, Groups, and Objects 290 Racadm Deprecated Subcommands Replaced With 291 Index 292 Community string, 234 sslcertdownload Usercertupload

Dell IDRAC6 3.5, CMC 3.2 Serveraction, 30describes the serveraction power control options, 115

Models: IDRAC6 1.95 CMC 3.2 IDRAC6 3.5