iDRAC6 and CMC Property Database Group and Object Descriptions 151
FILE LOCATION:
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY
3
iDRAC6 and CMC Property Database Group and Object Descriptions
The iDRAC6 and CMC property database contains the configuration
information for iDRAC6 and CMC. Data is organized by associated object,
and objects are organized by object group. The IDs for the groups and objects
that the property database supports are listed in this section for iDRAC6
Enterprise on Blade Servers, iDRAC6 Enterprise or Express on Rack and
Tower Servers and CMC.
Use the group and object IDs with the RACADM subcommands to configure
iDRAC6 and CMC.
Table3-1 provides an overview of the object groups applicable for iDRAC6
Enterprise on Blade Servers, iDRAC6 on Rack and Tower Servers and CMC.
CAUTION: Racadm sets the value of objects without performing any functional
validation on them. For example, RACADM allows you to set the Certificate
Validation object to 1 with the Active Directory object set to 0, even though
Certificate Validation can happen only if Active Directory is enabled. Similarly, the
cfgADSSOEnable object can be set to 0 or 1 even if the cfgADEnable object is 0,
but it takes effect only if Active Directory is enabled.
All string values are limited to displayable ASCII characters, except where
otherwise noted.