104 RACADM Subcommand Details
racadm getversion -l -m server-1 -f bios
ifconfig
NOTE: To use this subcommand, you must have Execute Diagnostic Commands or
Configure iDRAC permission.
Synopsis
racadm ifconfig
Example
$ racadm ifconfig
eth0 Link encap:Ethernet HWaddr 00:1D:09:FF:DA:23
inet addr:10.35.155.136 Bcast:10.35.155.255
Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500
Metric:1
RX packets:2550665 errors:0 dropped:0
overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0
carrier:0
BIOS 1.2.1 Reinstall
iDRAC 3.20 Reinstall
PERC6 Emb (raid-2) 07.01.33.00 Rollback
PERC6 Emb (raid-2) 07.01.33.00 Reinstall
<Server> <Component> <Version> <Install Date>
server-1 BIOS 1.2.1 2010-11-22
Subcommand Description
ifconfig Displays the contents of the network interface table.