112 RACADM Subcommand Details
<senType> <Num> <sensorName> <status> <AC-OK status>
PWR 1 PS-1 Online OK
PWR 2 PS-2 Online OK
PWR 3 PS-3 Online OK
PWR 4 PS-4 Slot Empty N/A
PWR 5 PS-5 Failed OK
PWR 6 PS-6 Slot Empty N/A
racreset NOTE: To use this subcommand for CMC you must have Chassis Administrator
privilege and for iDRAC you must have Configure iDRAC permission.
NOTE: When you issue a racreset subcommand, iDRAC6 may require up to two
minutes to return to a usable state.
NOTE: You must reboot your system after performing a hard reset of iDRAC6 as
described in Table2-28.
Synopsis
racadm racreset [hard | soft]
Table2-28 describes the racreset subcommand options.
Examples
•racadm racreset
Start the iDRAC6 soft reset sequence.
Subcommand Description
racreset Issues a reset to iDRAC6. The reset event is written into iDRAC6 log.
Table 2-28. racreset Subcommand Options
Option Description
hard A hard reset performs a deep reset operation on the remote access
controller. A hard reset should only be used as a last case resort of
resetting iDRAC6 controller for recovery purposes.
soft A soft reset performs a graceful reboot operation on the RAC.