Dell CMC 3.2, IDRAC6 1.95, IDRAC6 3.5 manual getdcinfo

64 RACADM Subcommand Details
• racadm getconfig -h
Displays a list of the available configuration groups on iDRAC6 in an
alphabetical order.
•racadm getconfig -u root
Displays the configuration properties for the user named root.
•
racadm getconfig -g cfgUserAdmin -i 2 -v
Displays the user group instance at index 2 with verbose information for
the property values.
getdcinfo
NOTE: To use this subcommand, you must have CMC Login User privilege.
NOTE: Fabric verification for server DCs is performed only when the chassis is
powered on. When the chassis is on standby power, iDRACs on the server modules
remain powered off and thus are unable to report the server's DC fabric type. The
DC fabric type may not be reported in the CMC user interface until iDRAC on the
server is powered on.
Synopsis
racadm getdcinfo
Table2-14 describes the getdcinfo subcommand options.
Subcommand Description
getdcinfo Displays general I/O module and daughter card configuration
information.
Table 2-14. getdcinfo Subcommand Options
Option Description
-n Displays the model names for the daughter cards in servers.