iDRAC6 and CMC Property Database Group and Object Descriptions 171
FILE LOCATION:
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY
cfgUserAdmin
This group provides configuration information about the users who are
allowed to access iDRAC6 or CMC through the available remote interfaces.
Up to 16 instances of the user group are allowed. Each instance represents the
configuration for an individual user.
NOTE: In the current CMC firmware version, the objects cfgUserAdminEnable and
cfgUserAdminPrivilege are interrelated; changing the value of one property causes
the value of the other property to change. For example, if a user does not have login
privilege, the user is disabled by default. When you enable the user by changing the
value of UserAdminEnable to 1, the right most digit of the UserAdminPrivilege also
becomes 1. On the other hand, if you change the right most digit of the
UserAdminPrivilege to 0, the value of UserAdminEnable becomes 0.
NOTE: Use this object with the config or getconfig subcommands. You must supply
an index group number to use these commands as follows: -i <index group>
NOTE: To use this object property for CMC, you must have Chassis Configuration
Administrator privilege.
NOTE: For CMC, you can configure any setting that is not preceded by the hash
sign (#) in the output. To modify a configurable object, use the -o option.
The following sections provide information about the objects in the
cfgUserAdmin group.

cfgUserAdminIndex (Read Only)

Description The unique index of a user.
For CMC, the index number is used to specify a unique group
name. Only valid for indexed groups.
Legal Values For iDRAC6: This parameter is populated based on the existing
instances.
For CMC: The parameter is specified by a decimal integer from
1–16.
Default <index of the instance>