SFORmat Subsystem

SLAVe

SLAVe

Command:MACHine{12}:SFORmat:SLAVe <clock_id>, <clock_spec>

<clock_id>

<clock_spec>

Example

Query

Returned Format

Example

The SLAVe clock command allows you to specify a slave clock for a given machine. The slave clock is only used in the Slave and Demultiplexed clocking modes. Each command deals with only one clock (J,K,L,M); therefore, a complete clock specification requires four commands, one for each clock. Edge specifications (RISing, FALLing, or BOTH) are ORed.

When slave clock is being used at least one edge must be specified.

{JKLM}

{OFFRISingFALLingBOTH}

OUTPUT XXX;":MACHINE2:SFORMAT:SLAVE J, RISING"

:MACHine{12}:SFORmat:SLAVe?<clock_id>

The SLAVe query returns the clock specification for the specified clock.

[:MACHine{12}:SFORmat:SLAVe] <clock_id>,<clock_spec><NL>

OUTPUT XXX;":MACHINE2:SFORMAT:SLAVE? K"

5–15