HP 16555A, 16555D, 16554A manual ∙ Arm

Introduction

The MACHine subsystem contains the commands that control the machine level of operation of the logic analyzer. Some of the functions are normally found in the Trigger menu. These commands are:

∙ARM

∙LEVelarm

The functions of three of these commands reside in the State/Timing Configuration menu. These commands are:

∙ASSign

∙NAME

∙TYPE

Even though the functions of the following commands reside in the Format menu they are at the machine level of the command tree and are therefore located in the MACHine subsystem. These commands are:

∙REName

∙RESource

3–2