Table
Selector
Example
WLISt Subsystem
WLIStWLISt Subsystem Parameter ValuesParameter | Value |
delay_value | real number between |
module_spec | {12345678910} (slot where master card |
| is installed) |
bit_id | integer from 0 to 31 |
label_name | string of up to 6 alphanumeric characters |
line_num_mid_screen | integer from |
| +1040384 (HP 16555A) or |
waveform | string containing <acquisition_spec>{12} |
acquisition_spec | {ABCDEFGHIJ} |
time_value | real number |
time_range | real number between 10 ns and 10 ks |
WLISt
:WLISt
The WLISt (Waveforms/LISting) selector is used as a part of a compound header to access the settings normally found in the Mixed Mode menu. Because the WLISt command is a
The WLISt subsystem is only available when one or more state analyzers with time tagging on are specified.
OUTPUT XXX;":WLIST:XTIME 40.0E−6"