Programming Examples
Making a State Compare Analyzer MeasurementMaking a State Compare Analyzer Measurement
This program example acquires a state listing, copies the listing to the compare listing, acquires another state listing, and compares both listings to find differences.
This program is written so that you can run it with the HP
10 ! *********** STATE COMPARE EXAMPLE ********************************
20! for the HP 16554A/HP 16555A/HP 16555D Logic Analyzer
30!
40!
50!******* SELECT THE HP 16554A/HP 16555A/HP 16555D MODULE ***********
60! Select the slot in which the module is installed.
70! In this example, it is in slot B of the mainframe.
80!
90OUTPUT 707;":SELECT 2"
100!
110!************** CONFIGURE THE STATE ANALYZER ***********************
120! Name Machine 1 "STATE," configure Machine 1 as a compare state
130! analyzer, and assign pod 1 to Machine 1.
140!
150OUTPUT 707;":MACHINE1:NAME ’STATE’"
160OUTPUT 707;":MACHINE1:TYPE COMPARE"
170OUTPUT 707;":MACHINE1:ASSIGN 1"
180!
190! ******************************************************************
200! Remove all labels previously set up, make a label "SCOUNT," specify
210! positive logic, and assign the lower 8 bits of pod 1 to the label.
220!
230OUTPUT 707;":MACHINE1:SFORMAT:REMOVE ALL"
240OUTPUT 707;":MACHINE1:SFORMAT:LABEL ’SCOUNT’, POS, 0,0,255"
250!
260! ******************************************************************
270! Make the "J" clock the Master clock and specify the falling edge.
280!
290OUTPUT 707;":MACHINE1:SFORMAT:MASTER J, FALLING"
300!