HP 16555A, 16555D, 16554A manual CommandMACHine12SWAVeformINSert labelname, bitid

SWAVeform Subsystem

INSert

INSert

CommandMACHine{12}:SWAVeform:INSert <label_name>, <bit_id>

<label_name>

<bit_id>

<bit_num>

Example

The INSert command allows you to add waveforms to the state waveform display. Waveforms are added from top to bottom on the screen. When 96 waveforms are present, inserting additional waveforms replaces the last waveform. Bit numbers are zero-based, so a label with 8 bits is referenced as bits 0 through 7. Specifying OVERlay causes a composite waveform display of all bits or channels for the specified label.

string of up to 6 alphanumeric characters

{OVERlay <bit_num> ALL}

integer representing a label bit from 0 to 31

OUTPUT XXX;":MACHINE1:SWAVEFORM:INSERT ’WAVE’, 19" OUTPUT XXX;":MACHINE1:SWAVEFORM:INSERT ’ABC’, OVERLAY" OUTPUT XXX;":MACH1:SWAV:INSERT ’POD1’, #B1001"

MLENgth

Command:MACHine{12}:SWAVeform:MLENgth <memory_length>

The MLENgth command allows you to specify the analyzer memory depth. Valid memory depths range from 4096 states (or samples) through the maximum system memory depth minus 8192 states. Memory depth is affected by acquisition mode. If the <memory_depth> value sent with the command is not a legal value, the closest legal setting will be used.

<memory_length> {4096 8192 16384 32768 65536 131072 262144 516096 (HP 16554A)

524288 1040384 (HP 16555A)

524288 1048576 2080768 (HP 16555D)}

8–8