SWAVeform Subsystem
TPOSition
TPOSition
CommandMACHine{12}:SWAVeform:TPOSition {STARtCENTerENDPOSTstore,<percent>}
<percent>
Example
Query
Returned Format
Example
The TPOSition command allows you to control where the trigger point is placed. The trigger point can be placed at the start, center, end, or at a percentage of post store. The post store option is the same as the User Defined option when setting the trigger point from the front panel.
The TPOSition command is only available when the acquisition mode is set to manual.
integer from 1 to 100
OUTPUT XXX;":MACHINE2:SWAVEFORM:TPOSITION CENTER"
MACHine{12}:SWAVeform:TPOSition?
The TPOSition query returns the current trigger setting.
[MACHine{12}:SWAVeform:TPOSition]
{STARtCENTerENDPOSTstore,<percent>}<NL>
OUTPUT XXX;":MACHINE2:SWAVEFORM:TPOSition?"