HP 16554A, 16555D, 16555A manual Base, CommandMACHine12SYMBolBASE labelname, basevalue

Selector

Example

SYMBol Subsystem

SYMBol

SYMBol

:MACHine{12}:SYMBol

The SYMBol selector is used as a part of a compound header to access the commands used to create symbols. It always follows the MACHine selector because it selects a branch directly below the MACHine level in the command tree.

OUTPUT XXX;":MACHINE1:SYMBOL:BASE ’DATA’, BINARY"

BASE

Command:MACHine{12}:SYMBol:BASE <label_name>, <base_value>

The BASE command sets the base in which symbols for the specified label will be displayed in the symbol menu. It also specifies the base in which the symbol offsets are displayed when symbols are used.

BINary is not available for labels with more than 20 bits assigned. In this case the base will default to HEXadecimal.

<label_name> string of up to 6 alphanumeric characters

<base_value> {BINary HEXadecimal OCTal DECimal ASCii}

Example OUTPUT XXX;":MACHINE1:SYMBOL:BASE ’DATA’,HEXADECIMAL"

15–5