Command
Example
Query
SWAVeform Subsystem
ACCumulateACCumulate
:MACHine{12}:SWAVeform:ACCumulate
{{ON1}{OFF0}}
The ACCumulate command allows you to control whether the waveform display gets erased between individual runs or whether subsequent waveforms are allowed to be displayed over the previous waveforms.
OUTPUT XXX;":MACHINE1:SWAVEFORM:ACCUMULATE ON"
MACHine{12}:SWAVeform:ACCumulate?
The ACCumulate query returns the current setting. The query always shows the setting as the characters, "0" (off) or "1" (on).
Returned Format [MACHine{12}:SWAVeform:ACCumulate] {01}<NL>
Example | OUTPUT XXX;":MACHINE1:SWAVEFORM:ACCUMULATE?" |
|
|
ACQuisition
Command:MACHine{12}:SWAVeform:ACQuisition {AUTOmaticMANual}
The ACQuisition command allows you to specify the acquisition mode for the state analyzer. The acquisition modes are automatic and manual.
Example | OUTPUT XXX;":MACHINE2:SWAVEFORM:ACQUISITION AUTOMATIC" |
|
|