HP 16555D, 16555A manual Tag, MACHine12STRiggerTAG OFFTIMEstatetagqualifier, MACHine12 STRiggerTAG?

STRigger (STRace) Subsystem

TAG

Command

<state_tag_ qualifier>

Example

Query

Returned Format

Example

TAG

:MACHine{12}:STRigger:TAG {OFFTIME<state_tag_qualifier>}

The TAG command selects the type of count tagging (state or time) to be performed during data acquisition. State tagging is indicated when the parameter is the state tag qualifier, which will be counted in the qualified state mode. The qualifier may be a single term or a complex expression. The terms A through J are defined by the TERM command. The terms IN_RANGE1 and 2 and OUT_RANGE1 and 2 are defined by the RANGe command.

Expressions are limited to what you could manually enter through the State Trigger menu. Regarding parentheses, the syntax definitions below show only the required ones. Additional parentheses are allowed as long as the meaning of the expression is not changed. A detailed example is provided starting on page 6-10.

<qualifier> see "Qualifier" on page 6-6

OUTPUT XXX;":MACHINE1:STRIGGER:TAG OFF"

OUTPUT XXX;":MACHINE1:STRIGGER:TAG TIME"

OUTPUT XXX;":MACHINE1:STRIGGER:TAG ’(IN_RANGE OR NOTF)’" OUTPUT XXX;":MACHINE1:STRIGGER:TAG ’((IN_RANGE OR A) AND E)’"

:MACHine{12} :STRigger:TAG?

The TAG query returns the current count tag specification.

[:MACHine{12}:STRigger:TAG] {OFFTIME<state_tag_qualifier>}<NL>

OUTPUT XXX;":MACHINE1:STRIGGER:TAG?"

6–17