Telos ZephyrExpress user manual Command Language Details

The reply will always take the same format:

•The first line is the name of the command ZephyrExpress is describing.

•The second line is the argument — a word or number that modifies the command.

Anything within brackets [ ] is optional. Some commands have the entire argument within brackets; if you send this command without an argument, it will report the present value. So if you just sent baud and Return, ZephyrExpress would send back the current communication rate.

Anything between < > is a single argument. A bar means or, as in “choose this argument or the other”. So you could send baud #4800, or baud #9600, or baud #19200 and Return to set ZephyrExpress to one of those rates.

•The text after the ---separator describes how the command works.

•If an argument allows a hyphen, you can use it keep the existing value for that parameter.

•For most commands, you can enter a hyphen (the line should consist of just -¶) to repeat the last command with all the same arguments.

If you send ? *¶, ZephyrExpress will describe all the commands available at the current security level. Since this is a lot of text sent in a continuous burst, be sure to have your terminal program’s logging or capture to file function turned on.

Command Language Details

This chart shows the commands available at the User security level.

Command	Argument	Notes
?	none	Display general help instructions
	[topic	Get help about topic.
	*]	Display all topics with their help.
	Example ? baud ¶	Returns instructions on using the Baud
		command
baud	none	Display current port speed.
	[<#300#600#1200#2400	Immediately change to the serial port
	#4800#9600#19200	speed indicated.
	#38400#57600>]
	Example baud #19200 ¶	Sets serial port to 19.2kbps

SYSTEM FUNCTIONS 8-7