Telos ZephyrExpress user manual Display current encoder input & decoder

t

DEEP TECH NOTE!

Remote control values for LCD contrast and backlighting are only vaguely related to the 0-100% settings in the System menu.

level	none				Display current encoder input & decoder
					output level, for testing the meter
					calibration.
log	[<GEN>	<SYS>	<ISDN>	<IMON>	Used for remote debugging. During a
	<DEB>	<off>]			support call, we may ask you to send this
					command and tell us what the result is.
login	[<?>				Display current security level.
	<password>]				Unlock at the security level associated with
					this password.
	Example login		user ¶		Opens communication at User level.
logout	none				Log out from ZephyrExpress control
					system.
metertest	none				Resets front panel level meters to normal
					operation after a test.
	[<0...9	0...9 0...9			Turns on the four level meter LEDs up to
	0...9>]				the number indicated, for lamp testing.
					If you’re going to specify an argument, you
					must supply numbers for all four meters:
					metertest 9 9 ¶ would be rejected.
	Example metertest 9 9			9 9 ¶	Lights up all four metersas if they were
					indicating a signal at -10dB.
mic	<12both>		[<phanthighf>		Switches microphone phantom power or
	<onoff>]				highpass filter on or off, or sets mic
	[<hisensmedsenslosens				sensitivity.
	linesense>]
	Example mic 2 highf on ¶				Turns on the highpass filter for mic 2.
mop	none				Displays the current codec mode (using the
					codes below).
	[<l3dul3stl3jog722				Sets the transmit mode to L3-dual or L3-
	l2mo64l2mo128l2du				stereo or L3-joint or G.722 or L2-mono64
	l2jo->]				or L2-mono128 or L2 dual or L2-joint. If
					the parameter is sent as “–”, the current
					transmit mode is kept.
	[<l3stl3mog722l2->]				Sets the receive mode to L3-stereo or L3-
					mono or G.722 or L2. If the parameter is
					sent as “–”, the current receive mode is

SYSTEM FUNCTIONS 8-9