PTP ETS300

h

Mon1 XMT pan Opens the Monitor 1 Send panning submenu.

A setting Sets how the Send A bus signal is panned when Monitor 1’s A-only routing is used.

B setting Sets how the Send B bus signal is panned when Monitor 1’s B-only routing is used.

AB setting A Sets how the Send A bus signal is panned when Monitor 1’s AB routing is used.

AB setting B Sets how the Send B bus signal is panned when Monitor 1’s AB routing is used.

HOT TIP!

ZephyrExpressÕ monitor panning is a sophisticated feature designed to support complex routing and mix-minus configurations in the field. Read about it in Sec- tion 4, Audio.

Mon1 RCV Pan Opens the Monitor 1 Receive panning submenu. See above.

Mon2 XMT Pan Opens the Monitor 2 Send panning submenu. Ditto.

Mon2 RCV Pan Opens the Monitor 2 Send panning submenu. And again.

Audio Setups See Setups, page 6-6

ISDN menu

The first item in this menu is the ISDN Setup. See page 6-6.

Switch Type Selects the ISDN switch protocol, and must match information given to you by the telephone company1.

Ntl.I-1National ISDN -1, the most common switch in the US.

AT&T Point-to-Point; also for DMS-100 Custom ISDN.

European ISDN

1ZephyrExpress will not be able to communicate with an ISDN line if this information is wrong. See section 7, ISDN, for complete details.

MENUS 6-15

Page 110
Image 110
Telos ZephyrExpress user manual Isdn menu