Telos ZephyrExpress user manual AT&T Point-to-Multipoint Custom, Zephyr Settings for YOU to Enter

ZEPHYREXPRESS SETTINGS (FOR YOU TO ENTER):

Set Switch type to: PTP

SPIDs: Not required

AT&T Point-to-Multipoint (Custom)

Available on AT&T 5ESS CO switches version 5E6 and above. This is becoming essentially obsolete as NI-1 has the same capabilities.

It is not supported by ZephyrExpress.

Order AT&T Point-to-Point (Custom) or National ISDN-1 instead.

Northern Telecom DMS100 ÔFunctionalÕ (Custom, PVC1) (USA, Canada, some others)

Available on Northern Telecom DMS100 switches BCS 31 and above.

CO VALUES (TO TELL THE PHONE COMPANY)

Line Type: Basic Rate, Functional

EKTS: No

Call Appearance Handling: No

Non-Initializing Terminal: No

Circuit Switched Service: Yes

Packet Switched Service: No

TEI: Dynamic

1010XXX: Yes

Bearer Service: CSD and/or CSV as desired (see above)

Turn off features such as: packet mode data, multiline hunt, multiple call appearances, Elec- tronic Key Telephone Sets (EKTS), shared directory numbers, accept special type of number, intercom groups, network resource selector (modem pools), message waiting, hunting, in- terLata competition, call waiting, etc.

Get: One or two SPID numbers, depending upon number of active B channels

ZEPHYR SETTINGS (FOR YOU TO ENTER)

Set Switch type to: Natl I-1

SPIDs: Enter one or two numbers, depending upon number of active B channels

7-12 ISDN