Updates

How ZephyrExpress works is almost entirely determined by software. This booklet is based on software version 1.2.1.

Power Supply

e

ZephyrExpress is powered by a separate modular power supply, which is self- adjusting to any voltage between 100 - 250 VAC, 50 - 60 Hz. It connects to a 4-pin XLR connector on the rear panel. The supply must be turned off at its switch, or disconnected from the AC line, before plugging or unplugging this XLR connector.

WARNING:

Do not use the XLR connector as an on/off switch!

Connecting or disconnecting the power supply while it is powered can erase current ISDN setup and other user settings.

Trademarks

Telos Systems, the Telos logo, Zephyr, ZephyrExpress, and “The Best Way to Hear from There” are trademarks of TLS Corporation. All other trademarks are property of their respective holders.

Copyright

Copyright © 1999 by TLS Corporation. Published by Telos Systems, who reserves the right to make improvements or changes in the products described in this manual, which may affect the product specifications, or to revise the manual without notice. All rights reserved.

Notice

All versions, claims of compatibility, trademarks, etc. of hardware and software products not made by Telos mentioned in this manual or accompanying material are informational only. Telos Systems makes no endorsement of any particular product for any purpose, nor claims any responsibility for operation or accuracy.

Warranty

This product is covered by a one year limited warranty, the full text of which is in the Appendix section.

Introduction v

Page 5
Image 5
Telos ZephyrExpress user manual Updates, Power Supply, Trademarks, Copyright, Warranty