Telos ZephyrExpress user manual Hot Tip

uPress the UTIL button.

A screen like this will appear. If you don’t see it, turn the EDIT knob counterclockwise.

U

h

Turn the EDIT knob clockwise, to select Codec.

Tap the knob towards the panel to confirm that choice. The display will change to look like this:

Turn the knob one click clockwise, to select the first text line (L3 stereo* in the picture above, but the text may be different on your ZephyrExpress). Tap the knob in towards the panel to confirm.

Turn the knob to select L3 Stereo*. Tap to confirm.

HOT TIP!

In the step above, make sure you are selecting L3 Stereo* in the centered line at the top of the screen.

ZephyrExpress will show you a confirmation screen, like this:

Turn the knob to select Yes and tap to confirm. It may take about ten seconds for ZephyrExpress to change codec modes. During that time, you’ll see a bent arrow, pointing down, in the upper right corner of the screen:

When the arrow disappears, hold the edit knob in towards the panel for a few seconds to return to the status screen. It should show Transmit L3-DUALand Receive L3-STEREO,like the illustration at the top of this section. If it says L3-STEREOtwice, that’s okay.

1-10 QUICK RESULTS