1-16 QUICK RESULTS

2: How do I use the menus?

uZephyrExpress uses a series of nested menus to set how it works. To open the menu
system, press the UTIL button to the right of the Edit knob. The Utility Screen, with a
list of submenus, will appear:
Scrollbar
Highlighted
Item
Description of
Highlighted
Item
To access any menu item, turn the EDIT knob until that item is highlighted. The scrollbar
moves up and down to show how far through the list you’ve gone.
TOnce you’ve highlighted an item, tap the EDIT knob toward the panel and the item’s
submenu will appear. Some screens refer to this knob as JOG to save space. It’s the
same thing.
Takes you up to next
higher menu
Pre-programmed
setu
p
Indicates there’s
a submenu
This item is directly
settable anddoesn’t
have submenus.
The first text entry in any menu is the current Setup for that menu (in this picture, it’s a
user-programmed setup called Symphony Hall). Setups instantly set every parameter in
every submenu below them. Some setups are pre-programmed at the factory, and
appear with an asterisk in their name. You can also create your own setups, following
instructions on page 1-18.
If an item displays its current value (such as Line sens Profess in the picture) you can
change its value with the EDIT knob:
1. Highlight the item and tap the knob once.
2. Turn the knob to cycle through its possible values. The currently-active setting has
brackets around it.
3. When you see the value you want, tap the knob to set it.
If you can’t change a value, make sure the SAFE light isn’t lit. See page 1-17 for more
information about Safe Mode.
When you change a Setup, every menu item below it is changed to match the stored
value for that setup.
If a menu item has a icon, there’s a submenu. Highlight it and tap the Edit knob to
open the submenu.
hHOT TIP!

To jump to the top of any menu, hold the Edit knob in and turn it one click to

the left. To jump to the bottom, hold the knob in and turn in one click to the