Telos ZephyrExpress user manual Kept

				kept.
	[<br56br64->]			Sets the ISDN bitrate to 56kbps or 64kbps,
				or keeps the current value.
	[<sr32sr48->]			Sets the audio sample rate to 32kHz or
				48kHz, or keeps the current value.
				You must specify all four arguments.
	Example mop -	l3mo	br64	Set the receive mode to L3-mono, the
	sr32 ¶			bitrate to 64kbps, and the sample rate to
				32kHz. Leave the transmit mode alone.
passwo	<current-pw>	[<new-pw>]		Change password for current security level.
				If you don’t specify a new password, this
				level will accept all logins without a
				password.
	Example passwo	user	steve ¶	If the current password is “user”, this will
				change it to “steve”.

w

Response New password for user	ZephyrExpress confirms the new
level:steve	password.
>>

WARNING!

Be sure you can remember the new password. Once you change it, there is no way to restore the original1. Check the response to make sure you typed the new password correctly.

Passwords are case-sensitive.

rtc	Read current time from ZephyrExpress’ real-time clock. Time will be
	in the format:
	30.03.1999 19:02:12, 15331 msec, 15.330856 sec,
	where the first string is the date, the second is the time of day, and the third
	and fourth indicate the total time since last startup.
telco	none	Display ISDN switch type.
	[<ETS300PTPNI1>]	Select switch type. This will restart the
		ISDN engine.
	Example telco ptp ¶	Sets the switch type to Point-to-Point.
version	none	Displays the current software versions.
	System software : 1.2.1
	Loadsetsoftware:2.36

1Well, there possibly is... but it’s messy and will take up a lot of your time and ours.

8-10 SYSTEM FUNCTIONS