Whirlpool W10234647A warranty Cooktop Use, Ceramic Glass, Cooktop On Indicator Light

KEYPAD	FEATURE	INSTRUCTIONS
CONVECT	Convection	1.	Press CONVECT BAKE.
BAKE	baking and	2.	Press TEMP/TIME “+” or “-” keypads to set a temperature other than 350°F (175°C) in
(on some	roasting
			5° increments between 170°F and 525°F (75°C and 275°C).
models)		3.	Press START.
		4.	To change the temperature, repeat Step 2. Press START or wait 5 seconds for the change to
			take effect.
		5.	Press CANCEL when finished.
KEEP WARM	Hold warm	Food must be at serving temperature before placing it in the warmed oven.
		1.	Press KEEP WARM.
		2.	Temperature is set at 170°F (75°C) for 60 minutes (1.00 hours).
		3.	Press START.
		4.	Press CANCEL when finished.
COOK TIME	Timed cooking	Timed Cooking allows the oven to be set to turn on at a certain time of day, cook for a set length
(on some		of time, and/or shut off automatically. Delay start should not be used for foods such as breads
models)		and cakes because they may not bake properly.
		To set a Timed Cook or a Delayed Timed Cook see “Timed Cooking” section.
DELAY START	Delayed start	The Delay Start keypad is used to enter the starting time for an oven function with a delayed
		start.
START	Cooking start	The Start pad begins any oven function. If Start is not pressed within 5 seconds, “PUSH”
		appears in the display. If start is not pressed within 1 minute after pressing a keypad, the
		function is canceled and the time of day is displayed.
CANCEL	Range function	The Cancel keypad stops any function except the Clock, Kitchen Timer, and Oven Control
		Lockout.
TEMP/TIME	Temperature and	The “+” or “-” keypads are used to adjust time and temperature settings.
	time adjust

COOKTOP USE

WARNING

Fire Hazard

Turn off all controls when done cooking.

Failure to do so can result in death or fire.

The control knobs can be set to anywhere between HIGH and LOW. Push in and turn to setting.

REMEMBER: When range is in use or (on some models) during the Self-Cleaning cycle, the entire cooktop area may become hot.

Ceramic Glass

The surface cooking area will glow red when an element is on. It may cycle on and off to maintain the selected heat level.

Use cookware about the same size as the surface cooking area. Cookware should not extend more than ½" (1.3 cm) outside the area.

Cleaning off the cooktop before and after each use will help keep it free from stains and provide the most even heating.

Cooktop On Indicator Light

The Cooktop On indicator light is located on the console panel. When any control knob on the console panel is turned on, the Cooktop On indicator light will glow.

Hot Surface Indicator Light

On ceramic glass models, the hot surface indicator light is located on the console panel.

The hot surface indicator light will glow as long as any surface cooking area is too hot to touch, even after the surface cooking area is turned off.

Dual Cooking Zone (on some models)

The Dual Cooking Zone offers flexibility depending on the size of the cookware. Single size can be used in the same way as a regular element. The dual size combines both the single and outer element and is recommended for larger size cookware.

A B

A.Dual

B.Single

5