Telos ZephyrExpress Protocol National ISDN-1, Protocol AT&T Point-to-Point Custom, CO Values

Fax page 2 of 3

PROTOCOL: National ISDN-1

From AT&T 5Ess, Northern Telecom DMS100, and Siemens EWSD.

If you use IOC Capability Packages, please use Capability Package ÒSÓ

CO Values:

Line Type: National ISDN-1

Bearer Service: CSD/CSV on both channels

TEI: One dynamic per number

10XXX Long Distance Prefix: Yes

Turn off features such as: packet mode data, multiline hunt, multiple call appearances, Electronic Key Tele- phone Sets (EKTS), shared numbers, accept special type of number, intercom groups, network resource selector (modem pools), message waiting, hunting, interLata competition, etc.

Note for EWSD running NI-97:Switch must be programmed CLID=DN

Give us:

1)Two SPID numbers, depending upon active number of B channels

2)Two Directory Numbers

PROTOCOL: AT&T Point-to-Point (Custom)

Software version 5E4.2 and above

CO Values:

Line Type (DSL class): Point-to-Point (PTP)

B1 Service: On Demand (DMD)

B2 Service: On Demand (DMD)

Maximum B Channels (MaxChan): 2

CSV Channels: Any

Number of CSV calls: 1

CSD Channels: Any

Number of CSD calls: 2

Terminal Type: A

APPENDIX 11-17