Chapter 12: Additional Information

NOTE

(1) Turn off the Wireless LAN Switch will cause the dis-

 

 

connection of the Wireless Network, please make sure

 

to close all the Wireless Connection before you exe-

 

cute this function.

 

(2) The Turn Off function on the TMU icon will cause the

 

disconnection of the Wireless Network, please make

 

sure to close all the Wireless Connection before you

 

execute this function.

 

(3) Enable “Power Saving Mode” will keep the connectiv-

 

ity but will lower down the average throughput due to

 

longer connection period for the Wireless Network.

 

(4) If you are in 802.11 Ad Hoc Mode, you are not allowed

 

to enable “Power Saving Mode”, because Ad Hoc

 

Mode doesn’t support this function.

 

F5: How do I make sure that the Wireless LAN SW has been installed successfully and that Wireless LAN already work prop- erly?

(1)Please check if the “IEEE 802.11b WLAN Adapter” already exist in Start, Settings, Connections, Network Adapters; if not, the Wireless LAN Driver is not Installed successfully.

(2)Please check if the Wireless LAN Utility already exist and could be opened successfully by simply click Start, Settings, System, then Wireless LAN Utility.

(3)Click Start, Settings, System, Wireless LAN Utility, Link to check the current Link information in the Link Page.

Error Messages for Bluetooth

This section explains the causes of and solutions for the various dis- played error messages.

Error messages during COM/DUN service

An error has occurred with the Bluetooth SD Card. Confirm that the card is working properly.

Cause

There was an error when loading the driver.

Solution

Try reinserting the Card.

Unable to retrieve Local Device information.

Solution

Reset the Toshiba Pocket PC.

Unable to retrieve Local Device information due to insufficient mem- ory. Check the amount of available memory.

223

Page 223
Image 223
Toshiba e805, e800 manual Error Messages for Bluetooth, 223, Error messages during COM/DUN service