Chapter 2: Basic Skills

Wireless Communication Switch

1.To enable Wireless module (Wireless LAN/Bluetooth models only), make sure the Wireless Communication Switch is turned on. (The default setting is Power Off. Open the switch cover, then slide the switch to the left to turn the power on.) If the switch is on, a window will pop up with a list of networks.

2.Select a network. On Windows Mobile 2003, if the switch is turned on, a window will popup to show the list of existing networks you can join.

Switch Cover

Wireless Communication Switch

Wireless LED Descriptions

LED indicates the different status:

LED

Status

 

 

Off

Wireless Communication Switch is turned OFF

 

 

Orange

Wireless Communication Switch is turned ON

 

 

Hold Switch

When the Hold switch is on, Program Buttons 1 through 5, Cursor Button,

and Scroller will be disabled. The Hold switch icon will be displayed on the navigation bar. On the contrary, when the Hold switch is off, these buttons will be enabled again.

23

Page 23
Image 23
Toshiba e805 Wireless Communication Switch, Wireless LED Descriptions, Hold Switch, LED indicates the different status