Toshiba e805, e800 manual 191, User Command, To use the commands to insert texts

Chapter 11: Optional Functions

the command is not recognized, a rejection tone sounds and the screen does not change.

User Command

You can define voice commands on Command Settings. There are two kinds of commands:

•Commands to insert texts

•Commands to launch applications.

To use the commands to insert texts:

1.On the User Commands tab in the Voice Command Settings, define a phrase you like to a command. For example, define “Thank you for your email about “for the command insert text one.

2.Open the Inbox, then tap New from the command bar. At the creat- ing the message screen, say “insert text one.” The “Thank you for your email about “is displayed on the screen.

To use the commands to launch applications:

1.On the User Commands tab in the Voice Command Settings, assign an application you like to a command. For example, assign Solitaire to the command run program one.

2.Say “run program one.” The Solitaire screen is displayed.

NOTE	When you say an undefined command, nothing happens
	even if the command is recognized.

Using Voice Command for Each Application

For example, you can use voice commands in the Calendar application.

1.With the Calendar open, say “Very next appointment.” The listing mode screen appears, and it starts reading out very next appoint- ment. You can display the screen also by saying, “Move to listing mode.” For detail of the command list, refer to the Commands tab on the Voice Command Settings.

191