Telos ZephyrExpress user manual Safe mode menu

When you select either choice, you’ll see a confirmation screen. Se- lect Yes to reset ZephyrExpress.

— About... When you select this item, you’ll see a screen like this:

V1.2.1/2.36 is the version number. 16.07.1998 12:39 reflects when the software was compiled.

If your ZephyrExpress’ About screen shows a lower version number, you have old software. If yours shows a significantly higher version number, this manual is probably out-of-date. In either case, contact Telos customer support.

Safe mode menu

The first item in this menu is the Safe Mode Setup. See page 6-6.

The other items in this menu can be set to Block or Allow, to determine whether a user can change the settings for that item when SAFE MODE is turned on from the back panel. See section 3, Hardware, and the front of this section for details.

h

— Codec	Locks the Codec menu
— Audio	Locks the Audio menu
— ISDN	Locks the ISDN menu
— System	Locks the System menu

—Channel assign Locks the front-panel MIC , LINE , and MONITOR routing buttons

—Manual dial Prevents the user from manually entering a phone number to dial.

—Autodial Prevents the user from dialing a preprogrammed number. This is most useful when using a contact closure or logic level to initiate a call through the Panic Dial feature.

—Safe Setups See Setups, page 6-6

HOT TIP!

Locked menus are still viewable from the menu system, even when SAFE MODE is on. They just canÕt be changed. This is so a remote user can report the settings of a unit without changing the lock mode.

MENUS 6-19