6-10 MENUS
Autodial Setups
The last item in the Utility screen lets you pre-program numbers for auto-dialing (see the
dialing instructions in Section 3, Hardware). When you select it, you’ll see a screen like
this:
In the Action field, you can select Create new, Update, View, and Delete.

Creating a new Autodial

If you select Create New, you’ll be able to enter a Name for the setup This name will appear
in the scrolling list when a user selects Autodial from the DIAL button.
After you confirm the name, you’ll see scrolling fields where you can enter telephone
Number1 and Number2 for the two lines, a Call type for each line (either Zephyr or analog
Phone), and a Master setup to be invoked when this autodial entry is used. You may enter
only one phone number if you prefer. You may set Master can be set to (none) if you
don’t want to automatically invoke a Master setup when the Autodial is used.
After you confirm the Master, the Go! box will be selected. Press EDIT to store the setup.

Editing or deleting an Autodial

If you selected Update as the Action, the Name field will display a scrolling list of existing
Autodial setups. Select one, and then change data as necessary in the scrolling fields be-
low it. Then select the Go! box and confirm.
If you selected Delete as the Action, the Name field will also display a scrolling list. When
you select one, the Go! box will be selected. Press Edit to confirm, and select Yes in the
confirmation screen that appears. You can’t delete a factory-preset Autodial: these are
Telos’ ISDN test lines, and we want them to be available for every user.