Telos ZephyrExpress user manual Times, # for decimal numbers

In addition, Expert level includes these commands:

	numbase		<dechexbinnone>		Set default number base to either decimal,
					hexadecimal, binary or none. If none is
					selected all numbers must be preceded by
					explicit specifiers.
					The default base can always be overridden
					by explicit specifiers:
t					% for binary
					$ for hex
					# for decimal numbers.
		NumbaseDEEP TECHisNOTE!provided for users who want to write their own control software. It
		affects only the remote control function: the displays remain in decimal at all
		times.
	oscill		<onoff>		Switch on/off test tone oscillator on both
					mic inputs.
	parport		none		Display parallel contact closure status.
			[<val0..valF>		Sets the four parallel contacts to match the
					bit pattern and ignore incoming ancillary
					data.
			<norm>]		Restores normal operation.
			example parport	val3 ¶	Sets contacts to off-on-on-on.
	reset		[coldres]		Reset the system by restarting the code
					without physical reset. cold will wipe out
					all user-defined system parameters and
					setups. res will maintain user settings.
					We may ask you to enter some other
					arguments during a support call.
	rtcset		<date time>		Set date and/or time of RTC (real time
					clock).
	switch				Return information about internal and
					backpanel switches.

SYSTEM FUNCTIONS 8-11