Telos ZephyrExpress user manual AT&T Point-to-Point Custom USA, Japan, Israel, some others

Terminal Type: A

1010XXX: Yes

Turn off features such as: packet mode data, multiline hunt, multiple call appearances, Elec- tronic Key Telephone Sets (EKTS), shared directory numbers, accept special type of number, intercom groups, network resource selector (modem pools), message waiting, hunting, in- terLata competition, call waiting, etc.

Get from Telco: One or two SPID numbers, depending upon number of active B channels; one or two directory numbers.

ZEPHYREXPRESS SETTINGS (FOR YOU TO ENTER)

Set Switch type to: Natl I-1

SPIDs: Enter one or two numbers, depending upon number of active B channels

AT&T Point-to-Point (Custom) (USA, Japan, Israel, some others)

Available on AT&T CO switches version 5E4.2 and above. This is the most basic possible configuration of ISDN, but supports all ZephyrExpress functions. It is the most conven- ient protocol for ZephyrExpress set-up because no SPIDs are required.

CO VALUES (TO TELL THE PHONE COMPANY):

Line Type (DSL class): Point-to-Point (PTP)

B1 Service: On Demand (DMD)

B2 Service: On Demand (DMD)

Maximum B Channels (MaxChan): 1 or 2

CSV Channels: Any

Number of CSV calls: 1

CSD Channels: Any

Number of CSD calls: 1 or 2

Terminal Type: A

Number Display: No

Call Appearance Pref: Idle

1010XXX: Yes

Turn off features such as: packet mode data, multiline hunt, multiple call appearances, Elec- tronic Key Telephone Sets (EKTS), shared directory numbers, accept special type of number, intercom groups, network resource selector (modem pools), message waiting, hunting, in- terLata competition, call waiting, etc.

ISDN 7-11