HP 445 manual Repetitions, Atping X.X wait, Disable identifier, Enable identifier, Help type

How To Use the Network Control Language (NCL) Commands To Manage a Router

General NCL Command Summary

Command		Function
! [repetitions]		Repeats the preceeding NCL command once or a number of
		times
	atping X.X [wait]	Send an AppleTalk Echo Protocol request to another AppleTalk
		node.
	boot	Reboot the router.
	browse	Display the entire current configuration in Configuration Editor
		format.
	config	Display the entire current configuration, in machine-readable
		format.
	crash	Display the router’s shutdown history.
	date [mm/dd/yy] [hh:mm:ss]	Set or display the router’s current date and time.
disable [identifier]		Disable a protocol, service, circuit, or other configuration entity.
	edit	Invoke the Configuration Editor without leaving NCL.
	enable [identifier]	Enable a protocol, service, circuit, or other configuration entity.
	exit	Leave NCL and return to the Main menu.
	help [type]	Get help for NCL commands (rget, zmodem, ospf,
		other, all).
	log	Examine, and optionally filter, the internal event log.
	log filter
	logi	Invoke the automatically updating Event Log without leaving
		NCL.
	page	Disable and re-enable display-paging mode for the console.
	password	Assign, change, or remove password protection on the router.
	ping X.X.X.X [count] [wait]	Send an Internet Control Message Protocol echo request to
		another node.
	print	Direct NCL display command output to a printer or file.
	quick	Invoke Quick Configuration without leaving NCL.
	quickr	Invoke Quick Remote without leaving NCL.
	repeat	Continually repeat the last NCL command until another key is
		pressed.

7-8