HP 445 manual Configuration Categories, DoD Internet Router

How To Use the Configuration Editor

How To Operate the Configuration Editor

	Configuration Categories
	The configuration categories include the available routing applications
	and some general items. The number in parentheses to the right of each
	item indicates the number of entries currently configured in the
	category. A 0 (zero) indicates that nothing is configured for that
	category. For example, in the preceding screen, item 7 is not configured:
		7. DoD Internet Router (0)
N o t e	In figure 4-3, the DEFAULT_CONFIG label appears when you have not
	yet assigned another name to the router. HP recommends that you
	assign a more specific name to this router later in the configuration
	process. When you do, that name appears instead of DEFAULT_CONFIG.
	Each item listed in figure 4-3 is briefly described below. For information
	on the parameters accessed by these items, refer to the Operator’s
	Reference.
	1.	System Names the router, specifies how the router initializes
	software services during a power-up or boot situation, and assigns
	values to global and session parameters.
	2.	Software Loads the application software supplied with your
	router.
	3.	Lines Specifies the physical connections between the router and
	the LANs and/or long-haul transmission facilities with which the router
	interfaces.
	4.	Circuits Specifies the logical connections between the router and
	the LANs and/or long-haul transmission facilities with which the router
	interfaces.
	5.	Circuit Groups Balances traffic across circuits.
	6.	Bridge Configures the Bridge application to your specific

requirements.

4
Editor	Configuration

4-9