HP 445 manual Moving From One Screen to Another, Enter selection 0 for previous menu

How To Use the Configuration Editor

How To Operate the Configuration Editor

The remaining items (including some that are not available on all models) provide tools for adjusting application or network management software modules to your requirements. Access only the items corresponding to the application or network management software modules you want to enable.

7.DoD Internet Router

8.DECNET IV Routing Service

9.SNMP Sessions

10.Xerox Routing Service

11.IPX Routing Service

12.AppleTalk Router

13.X.25 Network Service

14.V.25 bis Network Mapping

Moving From One Screen to Another

At the bottom of the Configuration Menu screen (figure 4-3) and many other screens is the prompt:

Enter selection (0 for previous menu): _____

Whenever this prompt occurs, it is preceeded by a numbered list of items you can select. If you don’t want to access any of the listed items, just press [Enter] to return to the preceding screen or action item. But if you want to access one of the listed items, type the number for that item and press [Enter]. Then:

If the item you select contains no entries (indicated by ‘‘(0)’’ at the end of the item) such as:

DoD Internet Router (0)

you will be prompted by the message

Do you wish to add ...? Yes

4-10