HP 445 manual How to exit from Quick Configuration and reboot the router

How To Use Quick Configuration

How To Create a Configuration

How to exit from Quick Configuration and reboot the router:

Use this procedure if you want to save and implement any configuration changes that you have made in the current Quick Configuration session.

1.Press the [Ctrl] [C] key combination and then type y to exit from the Quick Configuration utility. You will then see the “save and exit” prompt:

The

‘‘save

and exit’’

prompt

	Figure 3-6.Example of ‘‘Save and Exit’’ Prompt
N o t e	If the cursor is located in the rightmost (DECnet area.node) cell of the
	last port listed in the Quick Configuration screen, you can exit and
	display the ‘‘Save and Exit’’ prompt by just pressing [Return].

3
Configuration	Quick

3-9