HP R-2A, R-2 MD01, R-3A, R-2 RDR manual Select #1, Change Password, and press

RPC SERIES OWNER’S MANUAL

DETAILED OPERATION AND CONFIGURATION

________________________________________________________________________________

set, the RPC requires password entry before allowing the user to operate the RPC unit.

REMEMBER, the password feature is case sensitive.

Default outlet names are Outlet 1, Outlet 2, Outlet 3 . . . Outlet 6. From the RPC’s configuration menu, the user can change any outlet name to outline a unique set-up.

From the status menu’s RPC > prompt, type CONFIG. The following menu appears for the RPC-2:

RPC > CONFIG

1) . . . Change Password

2) . . . Change Outlet Name

Enter Request:

Or this menu for the RPC-2A:

1) . . . Change Password

2) . . . Change Outlet Name

3) . . . Enable/Disable Confirmation

4) . . . Enable/Disable Status Menu

X) . . . Exit

Enter Request:

Change Password	Select #1, “Change Password,” and press
	<cr> The RPC responds:
	Enter Current Password:
	If this is not an initial set-up and a password
	has already been set, enter the current
	password, followed by <cr>, otherwise,
	press <cr>. If you enter the password
	incorrectly, the RPC responds with an
	“Error” message and returns to the main
	menu. Consequently, you must start over by

23