RPC SERIES OWNER’S MANUAL
DETAILED OPERATION AND CONFIGURATION
________________________________________________________________________________
DETAILED OPERATION AND
CONFIGURATION
The following section, “Operation and Configuration,” provides a detailed approach to accessing, operating, and configuring the RPC.
NOTE: It is important that you type all commands correctly. Any combination of wrong entries results in an error message. As a result, you will have to start over from the previous menu.
RPC-2 AND RPC-2A
LOCAL ACCESS USING The RPC-2 and RPC-2A have an RJ-45 port
THE EIA-232for connecting to a local EIA232 device, SERIAL CONNECTION such as a computer terminal or external
modem. Most serial computers do not have RJ-45 connections; therefore, an adapter is provided with this unit to convert from a DE-9 connector to an RJ-45 connector (BayTech Part No. 9FRJ45PC-1). If you are connecting to a modem, use a modem adapter (BayTech Part No. 25MRJ45MD-8).
BayTech also manufactures a computer/terminal adapter (BayTech Part No. 25FRJ45PC-1) for converting from a DB-25 connector to a RJ-45 connector.
If your computer does have an RJ-45 connection, but the pin signals are different from those described for BayTech on Page 16 of this manual, it is possible for BayTech to customize an adapter for you. If you require a different adapter than the one supplied with this unit, contact BayTech’s Applications Engineers.
