RPC SERIES OWNER’S MANUAL INSTALLATION

________________________________________________________________________________

INSTALLATION

UNPACKING

Compare the unit and serial number of the equipment you received to the packing slip located on the outside of the box. Log this information on the sheet on page 60. Inspect equipment carefully for damage that may have occurred in shipment. If there is damage to the equipment or if materials are missing, contact BayTech technical support at 228-467-8231 or call toll free inside the United States at 800-523-2702. At a minimum, you should receive the following:

a.The RPC unit.

b.This manual with any applicable addendum’s.

c.Power Cords (4 with RPC-5) (1 with RPC2A/RPC3A).

d.1 ea. DE-9 (9 pin) PC com port adapter -- 9FRJ45PC-1.

e.1 ea. RJ-45 cross over cable -- RJ08X007.

f.1 ea. RJ-11 telco cable -- RJ04X007 (RPC-2 MD01 & RPC-2 RDR).

g.1 ea. external modem adapter -- 25MRJ45MD-8 (RPC-2 RDR).

NOTE: Keep the shipping container and packing material in the event future shipment is required.

PREPARING THE INSTALLATION SITE

The installation area should be clean and free of extreme temperatures and humidity. Allow sufficient space behind the RPC unit for cabling and receptacle connections.

12