RPC SERIES OWNER’S MANUAL
DETAILED OPERATION AND CONFIGURATION
________________________________________________________________________________
OPERATION | The RPC’s main menu allows you to |
| monitor and control equipment attached to |
| each of the |
| six receptacles. From this menu, you can |
| turn on, turn off, or reboot attached |
| equipment, individually, or all equipment, |
| simultaneously. |
| The RPC recognizes three basic operating |
| commands: ON n<cr>, OFF n<cr>, and |
| REBOOT n<cr>, where n represents the |
| outlet number. |
| There are six red LEDs on the front of the |
| RPC unit. There is a corresponding red |
| LED for each of the RPC’s six receptacles. |
| When the LEDs are illuminated, |
| corresponding receptacle(s) are turned |
| "ON," and consequently, attached |
| equipment is receiving power. If the LED’s |
| are not illuminated, corresponding |
| receptacle(s) are turned “OFF.” |
Accessing Main Menu | Power on the RPC unit. The following |
| outlet and circuit breaker status menu |
| appears: |
(c)1997 by BayTech
F2.07
Circuit Breaker : On
1) . . . OUTLET 1 | : Off |
2) . . . OUTLET 2 | : Off |
3) . . . OUTLET 3 | : Off |
4) . . . OUTLET 4 | : Off |
5) . . . OUTLET 5 | : Off |
6) . . . OUTLET 6 | : Off |
RPC > |
|
29
