RPC SERIES OWNER’S MANUAL
RPC SERIES QUICK START
________________________________________________________________________________
Change Password | Default password is <cr>; disabled. |
| Password is case sensitive. |
Change Outlet | From the User Management Menu, select |
List | the number of the user to modify, followed |
| by <cr>. Enter the number of the outlet(s) to |
| which you want to give or remove access. If |
| there is more than one outlet, enter the |
| numbers, separated by commas. Example: |
| 2,6,8. Default is no outlets selected. |
CONFIGURATION |
|
IMPORTANT: For network access, you must configure the IP address, subnet mask, and gateway from the serial port.
NOTE: Network parameters, such as IP Address, require a unit
reset. |
|
IP Address | Enter the RPC unit’s IP address in dotted |
| decimal format (200.4.3.50). Default is |
| 0.0.0.0 |
Subnet Mask | Enter the RPC unit’s subnet mask in dotted |
| decimal format (255.255.255.0). Default is |
| 0.0.0.0 |
Gateway | Enter the RPC unit’s Gateway address in |
| dotted decimal format (200.4.5.50). Default |
| is 0.0.0.0 |
Unit ID | Enter the RPC unit’s Unit ID (64 chars |
| max). Default is |
|
10