RPC SERIES OWNER’S MANUAL
DETAILED OPERATION AND CONFIGURATION
________________________________________________________________________________
Change Outlet List | The outlet list determines which outlets a | |
| particular user can access. From the User | |
| Management Menu, enter the number of the | |
| user to modify, followed by <cr>. Then | |
| select #2, “Change Outlet List.” The RPC | |
| Series responds: |
|
| To change outlet access, enter number(s) of outlets. If | |
| more than one entry, separate numbers with commas. | |
| CR to exit. |
|
| User Name: engineering |
|
| Outlet | Access |
| 1) . . . Outlet 1 | yes |
| 2) . . . Outlet 2 | no |
| 3) . . . Outlet 3 | yes |
| 4) . . . Outlet 4 | yes |
| 5) . . . Outlet 5 | no |
| 6) . . . Outlet 6 | yes |
| 7) . . . Outlet 7 | yes |
| 8) . . . Outlet 8 | no |
NOTE: If an outlet user’s list is changed and they are logged in at the time, their outlet list changes dynamically. If enabled, an updated outlet status report will be issued.
To toggle outlet access, enter the number that corresponds to the outlet you want to change. For example, if you want engineering to have access to Outlet 2, enter the number 2, followed by <cr>. If you want engineering to have access to Outlets 2, 5, and 8 enter the numbers 2, 5 and 8 separated by commas: 2,5,8, followed by <cr>.
46
