RPC SERIES OWNER’S MANUAL
RPC SERIES QUICK START
________________________________________________________________________________
Controlling Receptacles To set or change the status of the receptacles, enter one of the following commands: ON n, OFF n, REBOOT n, where “n” is the outlet number you want to command. Entering an outlet number of “0” sends the command to all outlets. Reboot only works on outlets which are in the “ON” condition.
CONFIGURATION | Type “CONFIG” from the RPC>prompt. |
| The following menu appears: |
| RPC >CONFIG |
| 1) . . . Change Password |
| 2) . . . Change Outlet Name |
| Enter Request: |
Change Password | Default password is <cr>. The maximum |
| field length is 8 alphanumeric characters. |
| The password feature is case sensitive. |
Change Outlet Name | Default Outlet Names are Outlet 1, Outlet |
| 2, … The maximum field length is 10 |
| alphanumeric characters. |
7
