HP R-2A, R-2 MD01, R-3A, R-2 RDR manual Disable Outlet Status Display? Y/N

RPC SERIES OWNER’S MANUAL

DETAILED OPERATION AND CONFIGURATION

________________________________________________________________________________

Outlet Status Display From the Outlet Operation Configuration Menu, select #1, “Outlet Status Display.” Depending on whether outlet status display is currently enabled or disabled, the RPC responds with the option to change the current status. Default setting is enabled:

Disable Outlet Status Display? (Y/N)

Command Confirmation When a command is sent to turn on, turn off, or reboot a receptacle, the enable/disable confirmation feature responds by asking you to confirm the command. For example, if the command ON 3 is sent, the enable/disable confirmation responds:

Turn On Outlet 3? (Y/N)

If the enable/disable feature is disabled, the

RPC will not ask to confirm the command.

From the Outlet Operation Configuration Menu, select #2, “Command Confirmation.” Depending on current status, the RPC responds with the option to change the setting. Default setting is enabled:

Disable Confirmation? (Y/N)

Outlet Power-Up Delay The Outlet Power-up delay allows a set amount of time to elapse after a unit power- up or user initiated reset before power is applied to the outlet. This power up sequence is also used when a REBOOT occurs.

51