HP R-2 RDR, R-2A, R-2 MD01, R-3A manual Name Outlets, Unique set-up.Default outlet names are

RPC SERIES OWNER’S MANUAL

DETAILED OPERATION AND CONFIGURATION

________________________________________________________________________________

From the Outlet Configuration Menu, select #3, “Outlet Power-up Delay.” The unit responds:

To set delay, enter number of outlet, CR to exit
Outlet power-up delays (in seconds):
1) . . . Outlet 1	:	0
2) . . . Outlet 2	:	0
3) . . . Outlet 3	:	0
4) . . . Outlet 4	:	0
5) . . . Outlet 5	:	0
6) . . . Outlet 6	:	0
7) . . . Outlet 7	:	0
8) . . . Outlet 8	:	0
Enter Request >

	Enter the number of the outlet to set a
	power-up delay, followed by <cr>. The unit
	responds:
	Outlet Name: Outlet 1
	Enter delay (seconds) >
	Enter the amount of time (up to 599
	seconds) to elapse before power is applied to
	the outlet. The RPC Series redisplays the
	power-up delay status reflecting the change.
Name Outlets	“Name Outlets” allows the user to customize
	outlet name(s) to identify individual pieces
	of equipment attached to the RPC. From the
	RPC’s configuration menu, the user can
	change any or all outlet names to outline a
	unique set-up.Default outlet names are
	Outlet 1, Outlet 2, Outlet 3 . . . Outlet 8.
	From the “Outlet Configuration” Menu
	select #4, “Change Outlet Name,” followed
	by <cr>. The RPC displays the following
	menu:

52