HP R-2 RDR FCC Radio Frequency Interface Statement, FCC Requirements for the RPC-2 MD01 and RDR

Models: R-2 R-3A R-2 RDR R-2A R-2 MD01

1 88
Download 88 pages 56.69 Kb
Page 69
Image 69

RPC SERIES OWNER’S MANUAL

FCC RADIO FREQUENCY INTERFACE STATEMENT

________________________________________________________________________________

FCC RADIO FREQUENCY INTERFACE STATEMENT

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with this manual, may cause interference to radio communication.

This equipment has been type tested and found to comply within the limits for a Class A digital device pursuant to Subpart J of Part 15 of FCC rules. FCC rules provide reasonable protection against interference with radio communications in a commercial environment. Not installing in accordance with this manual or operating this unit in a residential environment is likely to cause interference. In such cases, the user will be responsible for the expense of correcting the interference.

FCC REQUIREMENTS FOR THE RPC-2 MD01 AND RDR

a. Federal Communications Commission (FCC) has established rules permitting a direct connection to the telephone network. These connections use standardized jacks. Do not use this equipment on party lines or coin lines.

b. If this device is malfunctioning, it may also be causing harm to the telephone network; disconnect this device until the source of the problem is determined and repairs made. The Telephone Company may temporarily disconnect service until the problem is corrected.

c. The Telephone Company may make changes in its technical operations and procedures. If such changes affect the compatibility or use of this device, the Telephone Company is required to give adequate notice

of the changes. In this case, you have the right to file a complaint with the FCC.

62

Page 69
Image 69
HP R-2 RDR, R-2A, R-2 MD01, R-3A manual FCC Radio Frequency Interface Statement, FCC Requirements for the RPC-2 MD01 and RDR