RPC SERIES OWNER’S MANUAL
DETAILED OPERATION AND CONFIGURATION
________________________________________________________________________________
Accessing Main Menu Power on the RPC unit. The following status menu appears:
(c) 1997 by BayTech F2.07
| Circuit Breaker : On | |
| 1) . . . OUTLET 1 | : Off |
| 2) . . . OUTLET 2 | : Off |
| 3) . . . OUTLET 3 | : Off |
| 4) . . . OUTLET 4 | : Off |
| 5) . . . OUTLET 5 | : Off |
| 6) . . . OUTLET 6 | : Off |
| RPC > |
|
| If the status menu fails to appear, ensure the | |
| correct cables and adapters are being used | |
| and they are connected properly. Also, | |
| verify the serial communication parameters | |
| are correctly configured. | |
Controlling Receptacles | To set or change the status of receptacles, | |
| enter one of the following commands: ON | |
| n, OFF n, REBOOT n, where “n” is the | |
| outlet number you want to command. | |
| Entering an outlet number of “0” sends the | |
| command to all outlets. | |
Example: | To turn “On” Outlet 3, type ON 3 from the | |
| RPC prompt (RPC >). The RPC responds: | |
Turn On Outlet 3 (Y/N)?
Responding “Y” for yes turns “On” Outlet 3. Observe the status of Outlet 3 has changed to “On” in the status menu:
21
